Full-Body Tracking in VRChat: Trackers, Setup and Calibration

seabug
seabug
November 20, 2026 • 13 views

Full-body tracking (FBT) moves your avatar's hips, feet and sometimes knees with your real body. Its legs follow you when you walk, and its torso turns when you turn. VRChat supports it, but it isn't plug-and-play. You need the right trackers, a clean SteamVR setup and a calibration that fits your body to your avatar.

VRChat still labels FBT experimental, so parts of it may change. If a menu name below doesn't match what you see, check the official docs first.

Advertisement

Which trackers work for full-body tracking

Base-station (lighthouse) trackers

Lighthouse trackers such as the HTC Vive Tracker and the Tundra Tracker read SteamVR base stations. That's the same system your headset uses.

Tundra Trackers work with the HTC Vive 1.0 and 2.0 base stations and the Valve Index 2.0 base station. The VIVE Tracker 3.0 is also sold on VIVE's US store.

IMU trackers (SlimeVR)

IMU trackers measure their own rotation. The SlimeVR server combines that data with your body proportions and headset position. You don't need base stations or cameras. SlimeVR works with any headset that connects to SteamVR, and with any headset that runs VRChat standalone.

Inside-out trackers

The VIVE Ultimate Tracker doesn't need base stations. VIVE sells it as the 3+1 Kit and markets it for full-body tracking in VRChat. VRChat doesn't list it by name, so check that it works with your headset before you buy more than one.

Camera and AI tracking

VRChat doesn't officially support webcam or AI pose tools for full-body tracking. Apart from the hardware above, the one official route is OSC trackers. VRChat takes tracker positions and rotations over OSC, but you need your own program to send that data. It's an advanced route, not plug-and-play.

Tracker prices compared

Base-station IMU (SlimeVR) Inside-out (VIVE Ultimate Tracker)
Needs base stations Yes No No
Price (USD, as listed) Tundra Tracker single: $130 V1.2 from $219; Butterfly from $279 (pre-order) 3+1 Kit: $689

Those prices were on the vendor pages in November 2026. Bundles and stock change, so check the store before you buy.

If you already have SteamVR base stations, we'd start with Tundra Trackers. At $130 each, they have the lowest single-tracker price in the table, and you don't need any new hardware in the room.

How many trackers can you use

VRChat supports these tracker locations:

  • Feet
  • Knees
  • Hip
  • Chest
  • Elbows and shoulders (one tracker worn above the elbow controls both)

VRChat supports a maximum of eight additional trackers, on top of the headset and controllers. Two Avatars 3.0 options depend on how many points you track (see Avatar settings below). Add trackers one at a time. A badly placed knee tracker can make the pose worse, so get the basic setup stable first.

Set up SteamVR and assign trackers

Define which tracker goes where in SteamVR before you launch VRChat. Here's how:

  1. Launch SteamVR with your headset off.
  2. Turn on your controllers and trackers.
  3. Open the SteamVR menu, hover over Devices, and click Manage Vive Trackers.
  4. In the window that opens, click Manage Vive Trackers again.
  5. Use the dropdown to assign each tracker to Left Foot, Right Foot or Waist.
  6. To tell trackers apart, hold the button on the other two until they turn off. SteamVR shows a green icon for trackers that are on and a red icon for trackers that are off. Assign the one you are holding, then repeat for the rest.
  7. Label your trackers so you always know which is which.

The point assignment matters less than it seems, as long as no tracker shows "Held in Hand." Assign them properly anyway for compatibility.

Before you calibrate, set your height correctly in VRChat's settings and check that your playspace isn't offset. OpenVR Advanced Settings and Playspace Mover can both cause offsets.

Calibrate in VRChat

When VRChat detects your trackers, it switches to full-body mode and new options show up in the UI. To calibrate:

  1. Click Calibrate FBT in the Quick Menu. Small spheres show where your trackers are. This is calibration mode.
  2. Make sure you aren't about to walk into a wall or object. If your position is poor, move, then click Calibrate in the Quick Menu to reset.
  3. Check your Height setting. If it's wrong, your feet may go through the floor.
  4. Look down and place your real feet about one foot-width apart. Your avatar is pinned to your headset, so its legs sink when you look down. That's expected.
  5. Check that the hip tracker sits in a reasonable place on your body.
  6. If you use elbow or shoulder trackers, align your arms with your avatar's arms.
  7. Lift your head and look straight ahead. If you're looking down when you press the triggers, your viewpoint will be off.
  8. Press both Interact (usually trigger) buttons together.

If the result is wrong, calibrate again. If that keeps failing, try the legacy method, which you turn on with the --legacy-fbt-calibrate launch option.

Settings and launch options

Here's what each FBT setting and launch option does.

Setting What it does
Avatar Measurement (arm span or height) Sets how your body is matched to the avatar. Height mode is the better choice for FBT, so start there.
Lock Hip Enforces the hip position and lets the head drift to avoid odd spine angles.
Lock Head Enforces the head position and lets the hip drift.
Lock Both Enforces both, which can cause odd spine or neck angles.
Locomotion Animation toggle Disables avatar locomotion and the crouch and prone base-layer animations that can fight FBT.
--calibration-range="0.6" Sets how far from a predicted body point a tracker can sit and still be used. The default is 60 cm.
--freeze-tracking-on-disconnect Freezes disconnected trackers in place instead of letting them move with the body.
--disable-shoulder-tracking Avoids issues with some IMU-only arm trackers.
--custom-arm-ratio Adjusts scaling in arm-span mode. The default is 0.4537. Values around 0.415 may fit better.
--enable-ik-debug-logging Adds IK detail to the log. Use it when reporting a bug.

Avatar requirements

Calibration can't fix a rig that fights the IK. Check your avatar against this list:

  • Limb and torso proportions close to a human body.
  • No sudden bends in the spine in the rest pose. Any bend is treated as slack the IK will try to straighten.
  • Roll set to zero on all IK-driven bones, or the same value on all of them.
  • The hip sits above the top of the upper leg bones.
  • No full-body hacks, such as flipped hips, extra leg bones, or zero-length or unweighted necks.
  • Distance between bones is greater than zero. This matters most in the Hip, Spine, Chest, Neck and Head chain.
  • A very slight bend in the knees, toward the front of the rig, and in the elbows, toward the back.

If you rig your own avatar, From scan or generator to VRChat covers the basics.

Avatar settings

Avatars 3.0 has two options that affect FBT.

Use Auto Footstep is on by default and applies to 3-point and 4-point tracking. It controls the procedural lower-body animation that plays when you move around in room space. If you turn it off, your animations drive the lower body all the time.

Force Locomotion Animations is on by default and applies to 6-point and higher tracking. When it's off, joystick movement doesn't play the walk or run animation, so you can mime your steps with your tracking. If you turn it off, don't rely on the default Base and Additive layers. Make your own.

Fixing common full-body tracking problems

Feet slide or go through the floor

Check these four things:

  • Your height setting is wrong. Feet go through the floor when it's too high.
  • You calibrated while looking down. Recalibrate with your head up and looking forward.
  • Locomotion fights the trackers. Try the Locomotion Animation toggle, or review your Force Locomotion Animations setting.
  • Your playspace is offset. Clear any offset from OpenVR Advanced Settings or Playspace Mover before you calibrate.

Stilts or arm pull

The avatar's proportions usually cause this. Legs that are too long give a stilt effect, and short arms pull the hands. Try the height mode in Avatar Measurement first. In arm-span mode, --custom-arm-ratio can help, but a proportion problem belongs in the rig.

Hips flip during locomotion

Check that the hip sits above the top of the upper leg bones. A hip placed too low is a common cause.

A tracker drops out

Check its charge first. Then check its role in SteamVR, because a tracker with the wrong role feeds the wrong data. The --freeze-tracking-on-disconnect launch option keeps the rest of the pose stable while you fix it.

For more, search our archive for full-body tracking or VRChat avatar errors.